Weird Noise/Vibration on Liberty
 

I am getting a noise that sounds like a rubber band being plucked when I shoot my liberty. I have an original trophy taker on it. At first I thought it was the rest or the sight might be loose, but I checked both and they are tight. Any thoughts?

RE: Weird Noise/Vibration on Liberty
 

Do you have any string leeches installed on your string? Also, make sure all your acces.are tight.I always check the simple stuff first..Bob

RE: Weird Noise/Vibration on Liberty
 

Check the two screws to your module. Make sure they are tight and use thread-lock if you have to.

Fritz

RE: Weird Noise/Vibration on Liberty
 

....and last but not least check the cam timing. If the cam is not timed correctly then there will be an increase in noise and vibration.

RE: Weird Noise/Vibration on Liberty
 

Mich--are you using a self-aligning peep, or are you using the peep with the rubber tubing?
Sometimes the tubing can give you that plucking sound of a runner band.

RE: Weird Noise/Vibration on Liberty
 

My Trophy Taker was falling against the shelf on the riser and making noise, I have it reduced some but not satisfied yet.

RE: Weird Noise/Vibration on Liberty
 

Did you determine the source of the noise yet?

RE: Weird Noise/Vibration on Liberty
 

All screws are tight... I have the factory hush kit on it also. The peep has no tube/cord attached. I had a buddy stand off the side and he thought it sound like it was coming from the rest area. I haven't had much time to shoot, as the weather has been awful the last couple of days. I think I will head back to the shop and have them listen to it while I shoot.

Thanks for the thoughts.