[Deleted]
 

[Deleted by Admins]

RE: Brace Height??????????
 

From the string to the narrowest part of the grip !

[Deleted]
 

[Deleted by Admins]

RE: Brace Height??????????
 

Got to get your strings and cables twisted ! No big deal......but if you can't do it yourself .........take it to a good pro-shop !!

Your cam timing is probably off too ! There are two small timing holes in your cam .........they are supposed to line up straight and be parralel to your string !

[Deleted]
 

[Deleted by Admins]

RE: Brace Height??????????
 

I'm not positive on this but .....a MQ-1 is apprx. 37" ata .........so if your brace height is on......then your ata should be close ! Example: My LX was spec'd at 35" apprx. .............but actually was 35 3/4 " exactly when my brace height was the correct 6 5/8" !! Mathews said 35 3/4 " was correct !

RE: Brace Height??????????
 

The brace height will vary slightly frob bow to bow as well as the ATa length. The manufacturers have a reputation of fibbing a little too so that their bows will appear for "forgiving" to some.

If the holes in your cam are lined up with your string then leave it alone.

RE: Brace Height??????????
 

if your brace heighth is 1/4" short that means your a to a will be slightly longer if you put about 3 to 4 twist's in your harness and string this should get you to 7.5, however this is really a non issue