HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   fall awy arrow rest problem (https://www.huntingnet.com/forum/technical/52902-fall-awy-arrow-rest-problem.html)

oniedaeagle 02-13-2004 03:10 PM

fall awy arrow rest problem
 
i have a bowtech mighty mite and i put a golden key tko fall awy arrow rest on and the rest looks like it needs to be moved a 1/4 inch to the left but the rest is as far left as it will go:( what can i do and is this a comon problem or iam eye balling it wrong i need help please the way a find center shot is measure the limp put two lines in the middle of the limb and it should be lined up but it is 1/4 to a 1/8 inch to far to the right

Roland from Calif. 02-13-2004 04:52 PM

RE: fall awy arrow rest problem
 
If you're around .75 to .82 to the center of the arrow from the riser you should be very close to center shot. Everyone is a litttle different but this is going to get you pretty close.

oniedaeagle 02-13-2004 05:39 PM

RE: fall awy arrow rest problem
 
i measured from the riser to the center of the arrow rest it is .70-.75

KBacon 02-13-2004 05:48 PM

RE: fall awy arrow rest problem
 
You have the take the vertical bracket off.. and move it to the other side of the horizontal bracket that attaches to the bow. Should have plenty of adjustment after that.

oniedaeagle 02-13-2004 06:48 PM

RE: fall awy arrow rest problem
 
kbacon this is why i joined this forum thank you very much problem fixed thanks agian

pdq 5oh 02-13-2004 10:01 PM

RE: fall awy arrow rest problem
 
And start center shot at 7/8".

Tosoro Hunter 02-14-2004 05:30 PM

RE: fall awy arrow rest problem
 
Thanks.
That is what my dealer did.

The TKO shot bullets after that.


All times are GMT -8. The time now is 05:35 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.