What are you guys using to stabilze.....
 

What are you guys using to stabilze your extreme VFTs and are you using stabilizers in the front hole or the back? Thanks

RE: What are you guys using to stabilze.....
 

silent assassin I am using a Vibracheck Isolator 8" 10oz on my BowTech Patriot Dually but I just ordered a 6" Stealth so I can see what everybody is bragging about ,I hear they're the best so I'll give it a try . I'm going to put a Simm's Enhancer for the rear to absorb any missing vibration's if there is any .

nubo

RE: What are you guys using to stabilze.....
 

Can't comment on the EX VFTs as I don't have one but I am using a Xring 7 inch silicone on the Liberty (Sims Enhancer in the rear mount) and a NAP Shockblocker 500 with Sims, short mount, Enhancer 2000 on the MM VFT.

RE: What are you guys using to stabilze.....
 

My best friend has a 6" X-Ring silicone bead in the front on his EX-VFT and nothing in the back. It seems to work well for him.

My Liberty has a 4" Stealth Stabilizer in the front and a Simms Stabilizer Enhancer in the back, and this works amazingly well!

RE: What are you guys using to stabilze.....
 

I have an 03 Extreme VFT and just put a 6 1/2 inch Lore on it. It is a new model that has a pivot bolt mount. The camo matches the bow. Works great. I have nothing on the back side. I have looked at the Carolina Archery site and they have a photo of the all black one with no pivot bolt but I can't find a photo of the newer model. I paid $39.95.

RE: What are you guys using to stabilze.....
 

silent, not shooting a VFT, but I've had very good results with the Vibracheck Isolators. On my P40 Dually the 7 1/2" works well. Same thing on my Patriot. On the Liberty the new Isolator Carbon is working great.

RE: What are you guys using to stabilze.....
 

Front in order from bow to end:

• Sims Enhancer 2000
• 2 small Sims modules
• Sims Stabilizer enhancer

Back in order from bow to end:

• 1 small Sims module
• Sims Stabilizer enhancer


I wish I could put more weight behind to offset the Copper John sticking way out of the front. Anyone seen any heavy stubby stabilizers?

Fritz

RE: What are you guys using to stabilze.....
 

Thanks for all the responses!!!!!!!!

RE: What are you guys using to stabilze.....
 

Did you buy a new ExVFT too????

RE: What are you guys using to stabilze.....
 

Jeff,

What am I crazy:D No, a buddy of mine bought one and he was saying it was a little top heavy and he wanted to put a stabilizer in the back but he said the cables line up with the hole and it's only 1.75" to the cables. So I thought I would see what these guys are doing.