RE: Pic of my 2004 BowTech Patriot Dually
 

What brand of 2 piece quiver is on your bow? I thought that Bowtechs 2 piece was an 8 arrow model. Also what type of sight is that? Good looking rig.

RE: Pic of my 2004 BowTech Patriot Dually
 

When you get the chance to run some hunting weight arrows through a chronograph will you please post the speeds, Thanks.... That's the same bow that I'm leaning towards in my search for a new bow this year.

RE: Pic of my 2004 BowTech Patriot Dually
 

MQ1 I do have a gap there and the Bow Tech rep is going to trade me bow's this week he said that that shouldn't be like that ,as it is I can move my top and bottom cam ,when I push on them they snap when they move ,I believe that something was missing from the start.This goes to show how BowTech has already called me on this issue as I already said .Wolf this is a 2 piece P.S.E. quiver but I'm going to put the B/T quiver on later,the sight is a Impact Archery Cosmic and a Micro tune 3000 arrow rest ,it is a great bow and it's going to get lot's of use. Thank's for the response.

nubo

RE: Pic of my 2004 BowTech Patriot Dually
 

John,

I don't know how (factory or dealer, AGAIN) to tell you this but that bow looks to have the wrong cams on it which would be why there's a gap between the bushings and limb.

The 2004 cams don't have bushings, they have bearings in them and they also have a spacer on each side between the cam and limb.

What mods are in the bow, PD or DC mods?

Regards, Pat

RE: Pic of my 2004 BowTech Patriot Dually
 

WOW that's exactly what I was thinking!!! It looks like the cams on my '03 Pat Dually!

RE: Pic of my 2004 BowTech Patriot Dually
 

I just also noticed something in the pics, what is the brace height on that bow?? The string should not be past the cable guard rod, which is just under 7 inches long on my wife's new Patriot VFT single and a Liberty I recently shot. All these bows share the same riser. I believe you have Liberty or Patriot single limbs with '03 Dually cams!! The limb fork cut width for the '04 Patriot single limb is 11/16 inches and the fork cut width on my'03 Patriot Dually is 5/8 inches (approximate).
Someone had a bad day at the factory or your dealer is swapping stuff around!!!!
Can't wait till you get the right bow!!!![:'(]

RE: Pic of my 2004 BowTech Patriot Dually
 

Must be dejavoo, but wasn't there an archer on here who was sold a 2003 bow as a 2004? (sorry I'm out of the loop, been busy)
Tell me this isn't the same guy/bow?
It's bad enough that it's the same manufacturer.

ders sumptin skwewy going on!

RE: Pic of my 2004 BowTech Patriot Dually
 

Methinks the dist/dealer is really trying to pull the wool over peoples eyes.[:@]

There is no way in H-e-double L the bow would come from the factory w/ 2003 cams on a 2004 riser.

Looks to me like they took a Pat single and put dual cams on it.

RE: Pic of my 2004 BowTech Patriot Dually
 

Darn it. I can't see any of the pictures. They won't load for me. One of you guys want to email them to me? :(

RE: Pic of my 2004 BowTech Patriot Dually
 

No guy's I think you might be right again I noticed the mods were PD3 's as well. Now when I compared the bow's the riser is alot different than the 03 model ,I was pretty sure someone told me of the cam difference's on a previous post .The distributor called to tell me that they will be exchanging this bow this week and that this was an accident that I recieved this bow at all.I could tell you that this bow has other little differences as well but I'll wait and see what the next one look's like.
I knew you guy's would be able to tell me what was going on.

nubo