HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   HavocTec Information? (https://www.huntingnet.com/forum/technical/49964-havoctec-information.html)

RobinHood 01-19-2004 10:40 AM

HavocTec Information?
 
Need string and cable length information for Hoyt HavocTec. The markings on the Versa cam read VP3L. Can anyone tell me what the string and cable length would be for the bow? The cam is 27.5 to 31 inch adjustable versacam.

Thanks

PABowhntr 01-19-2004 10:56 AM

RE: HavocTec Information?
 
If you do not get a reply here then may I suggest you also try the Hoyt/Easton messageboard.... www.archeryoutdoors.com . Something of this specific a nature may be difficult for most folks to answer.

Hope this helps.

bbahunter 01-19-2004 01:19 PM

RE: HavocTec Information?
 
Does your bow have xt-2000 limbs and a dual track idler wheel?

RobinHood 01-19-2004 05:50 PM

RE: HavocTec Information?
 
bbahunter, Yes this bow has the XT-2000 limbs and the 2 track Idler wheel.

JeffB 01-19-2004 06:55 PM

RE: HavocTec Information?
 
Head on over the Hoyt webpage. Check under the tech specs section. they have string and cable lengths for nearly all thier bows from the past 5 or 6 years.:)

bbahunter 01-19-2004 07:36 PM

RE: HavocTec Information?
 
O.K., I think you need a 57.0 " string, 40.0 control cable, and a 36.0 yoke cable.
If you can, put the bow in a press, and measure the string and cables, most likely ,they will be stretched a little, but you can get an idea, what the lengths are.


All times are GMT -8. The time now is 09:53 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.