Easton,Beman,PSE,Goldtip?
#2
RE: Easton,Beman,PSE,Goldtip?
For under a hundred dollers, you have a lot of choices. Easton makes a couple of carbon shafts, game tracker carbon express is a very nice shaft, and gold tips which are very good, all for under a hundred dollers. I believe that the gold tips are the cheapest out of the 3 and are very popular.
I shoot gold tips, they are around 70.00 a dozen and I dont have one complaint about them.
I shoot gold tips, they are around 70.00 a dozen and I dont have one complaint about them.
#3
Join Date: Feb 2003
Location: Tornado Alley USA
Posts: 104
RE: Easton,Beman,PSE,Goldtip?
I sure like the PSE Carbon Force Extremes for target use out to 50 or so yards and for hunting purposes, I think the Dominators are great for the hunter needing good carbons for about the same price as good aluminum arrows. Of course, if you are shooting field, fita or something long distance, I recommend the Comp Pro's but if not, I think the Extremes are super.
#7
RE: Easton,Beman,PSE,Goldtip?
Before you buy ANY carbon arrow you should do a thread search here on the Tech forum for a thread called "carbons" from oh, the middle of last year, I reckon.
Most folks would really be suprised what you are, or are not, getting for your dollar w/ IC type carbon arrows.
JeffB
Most folks would really be suprised what you are, or are not, getting for your dollar w/ IC type carbon arrows.
JeffB
#9
Thread Starter
Join Date: Feb 2003
Location: Hepzibah WV USA
Posts: 313
RE: Easton,Beman,PSE,Goldtip?
I can get Goldtip 5575 Hunter's for 70 a doz made to my spec's. The 3d pro's are 90.00 a Doz.
I didnt get the 3d pro's because my bow shop said that the hunters would be with in spec the way he cuts them.
He measured each end of the shafts and cut the end that was out the most. This does not help when the middel of the shaft is out but it unsured that they where straight as possible. I think it was cool he took the time to do it!
I didnt get the 3d pro's because my bow shop said that the hunters would be with in spec the way he cuts them.
He measured each end of the shafts and cut the end that was out the most. This does not help when the middel of the shaft is out but it unsured that they where straight as possible. I think it was cool he took the time to do it!