Peep Sights?
 

I'm looking for ya'lls opinion on peep sights. Do ya'll use them? If so, what kind, and do you use them just for hunting or for 3D too? I have two that I can't decide on using. One is a C-Peep w/ the rubber to keep it straight and the other is the 2x2 without the rubber. I tried to get away from the rubber because I was hearing a popping sound when I shot. But the 2x2 doesn't always line up straight when I draw back. What should I do?

RE: Peep Sights?
 

I ditched the peep sights a few years back in order to avoid their uncertanties and added string weight. I went with a No-Peep by Timberline and haven't looked back. Wide open clear sight picture, dead on anchor repeatability and most importantly, utmost confidence...

RE: Peep Sights?
 

Nopeep for hunting, always....
.....superpeep (oldstyle) interchanceable screw'em in's with or without lenses for 3D (open class w/ 4x scope).

-Chief

RE: Peep Sights?
 

I've tried just about everything over the years and I've gone back to a sta - brite peep with the tubing. I bored out the hole from a 1/4 to 5/16th and with the tritium pin I can get good target aquisition all the way to legal even in the thick stuff on a cloudy night. For hunting I've found nothing better.

RE: Peep Sights?
 

I use a Super-Peep. Its lightweight and small and has no rubber tubing. (doesn't effect arrow speed much compared to bigger peeps and rubber tubing) The really nice thing about the Super-Peep is that the hole size is adjustable! the center is threaded, so for hunting I use the biggest size. For target shooting leagues I put in the smallest one I am cofortable with. When shooting 3D I use something in the middle. Its a very high quality peep!

Good Luck!