When to change broad head blades(foam target)?
I want to find out when to replace blades when shooting a foam target if at all. I have read arguments for shooting your hunting broad heads once to make sure they all fly true, that would boost confidence also, but others say don't and to use practice blades only. So is it better to have a set of practice blades that I shoot occasionally to make sure I am dead on then replace with factory blades and don't shoot those until its a target animal? Or shoot each hunting arrow once to make sure all fly true and then sharpen them up if needed? I have done some research and found some interesting info and tests done to measure sharpness before and after a target. I can post the test if you guys want. The one shot was negligible but there was a difference never the less. Just want to find out what you guys do with replaceable fixed blade broad heads. Thank you.
|
I never use hunting blades on targets and haven’t for 30 years. I bought a spin tester for my hunting heads a long time ago and I check to make sure they spin perfectly, or make adjustments until they do. Those heads are used for hunting solely. Also, since I use replaceable blades I replace them after I shoot a deer. I never use them twice...despite buddies telling me they resharpen the blades they shoot through deer. I might be taking it too far but it’s worked for me so I stick to it.
|
Originally Posted by YTCLT
(Post 4324322)
I never use hunting blades on targets and haven’t for 30 years. I bought a spin tester for my hunting heads a long time ago and I check to make sure they spin perfectly, or make adjustments until they do. Those heads are used for hunting solely. Also, since I use replaceable blades I replace them after I shoot a deer. I never use them twice...despite buddies telling me they resharpen the blades they shoot through deer. I might be taking it too far but it’s worked for me so I stick to it.
|
I practice and hunt with the same broadhead bodies. As soon as I find a broadhead/arrow combo that flies true, I insert sharp, replacement blades and place those in my quiver for hunting. I keep hunting and practice combos separate.
Never tried practice blades. Never tried to sharpen a razor blade. I agree with spinning all broadheads and inserts before shooting. |
I too only shoot new never used blades hunting. It is easy to take apart most broadheads and test them with old used blades. I have used practice blades and heads But as we all know hunting and practice are hard to compare shots unless you have no nervous system.
|
Originally Posted by wild bill g
(Post 4324847)
I too only shoot new never used blades hunting. It is easy to take apart most broadheads and test them with old used blades. I have used practice blades and heads But as we all know hunting and practice are hard to compare shots unless you have no nervous system.
|
All times are GMT -8. The time now is 09:19 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.