Victory Vap Problems
#1
Spike
Thread Starter
Join Date: Nov 2014
Posts: 1
Victory Vap Problems
I recently purchased a 2014 lightly used bow as a backup. It came with 2.5 dozen Victory Victory Armour Piercing V1 Arrows. Last night I spin tested the arrows to set them up for broadheads. I noticed a many a number of them had the broadhead aluminum adapters were bent. They have been glued in with Goat Tuff glue. In the little research that I have done I have a few options. 1. Scrap them and go with the A/C/C that I have always Shot. 2. Try and remove them and replace them with the Aluminum adapters or go with the stainless Steel which weighs about fifty more Grains.
The arrows are the VAP V1 300. They are 28.5 inches long and weigh 316 with the aluminum adapter installed. I shoot a 100 Grain Rage 3 blade. Will the added 50 or SS adapter total screw up my FOC if I can even get the adapters out? Thanks
The arrows are the VAP V1 300. They are 28.5 inches long and weigh 316 with the aluminum adapter installed. I shoot a 100 Grain Rage 3 blade. Will the added 50 or SS adapter total screw up my FOC if I can even get the adapters out? Thanks