![]() |
Hey C903
In another thread you mentioned seeing the Wensel Woodsman in action. I' d love to hear all about it, if you have the time...
|
RE: Hey C903
Rangeball.
The Wensel Woodsman is a very popular broadhead with Traditional shooters. You might go to www.stickbow.com and do a search on them there. I have thought about trying them, myself. They look like a very impressive broadhead. Sag. ![]() |
RE: Hey C903
Thanks Sag...
I guess this post wasn' t controversial enough for C903... :) |
RE: Hey C903
Rangeball:
I answered your question several days ago. Since it was just a passive observation and not a full-blown test, there was no reason to start a separate thread. You have to stay on alert or those deer will keep walking under your stand without you seeing them. |
RE: Hey C903
Really? Where?
Not in the thread I asked it in... http://forum.hunting.net/asppg/tm.as...mode=1&smode=1 If not deserving of a new thread, where' d you hide it? If the deer visiting my stand have anything in common with your answer, I don' t think I have a chance at seeing them no matter how hard I pay attention :) |
RE: Hey C903
Hmmm! I posted a couple of paragraphs about my observations….somewhere.
To summarize what I wrote, because I don' t want to write it all again on just an observation: My friend was shooting in on a medium-hard foam-rubber deer (interior might be less dense). He was shooting a 62" recurve, pulling about 53# @31" draw. He was trying some different heads to determine best flight characteristics. He was shooting Bears Razors, Zwickey, Magnus, and Wensel. The heads were mounted on 2 brands of wood and Easton 2413 aluminum. I had originally thought the Wensels were 140 grn heads. I found out yesterday that the heads were 125 grn. The aluminum mounted with Wensels turned in the best flight; although the group was left of POA, which we are sure is a spine issue. What I eventually observed, was that not only was the Wensels flying very well, the Wensels kept considerably out-penetrating the other heads. On one shot, an arrow actually penetrated the entire foam-rubber deer, maybe through a previously shot area. About 4" was protruding out the opposite side. A few other times, the Wensel penetrated to a depth that required pushing the head the rest of the way and then unscrewing the head so the shaft could be pulled out. I thought that performance was unusual for a shaft being launched from a 53# recurve. Distance was about 15 yards for the one that fully penetrated. Nothing scientific or controlled, just an observation. |
RE: Hey C903
Thank you... Must be that 3:1 mechanical advantage that Dr. Ashton refered to going on...
|
| All times are GMT -8. The time now is 07:25 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.