G5 Quest Rogue Shooters Please?!?!
 

Anybody that shoots a G5 Quest Rogue, I have a few questions for you! Mostly I need to know if you have had any issues with fletching contacting the cables?

I haven't ever worked on a G5 before, a buddy brought one over today for me to set it up and tune it.

Immediately we noticed that the fletching was contacting the cables at rest, and the cables ALMOST touch the string stop rod at full draw. I checked the ATA on both sides, balanced. The Cam and Idler Leans are spot on straight. The rest tunes very close to center shot, just outside about 1/8" of measured centershot (have to clock arrows cock vane out to avoid contact on firing).

The only options we have would be to either increase the cam and idler lean to move the string (but it's ideal now), or flip the cable guide to the outside of the guide rod, which would move the cables a LONG ways, so I'm worried about having too much torque on the limbs and riser.

It really seems like it should have WAY more clearance.

How much clearance do the Rogue's usually have?