RE: Glue for Carbon/inserts
 

http://www.pse-archery.com/Catalog/A...ssories_pg.htm

RE: Glue for Carbon/inserts
 

If the epoxy isn' t working then there' s a problem somewhere (the epoxy could be old, not mixing it correctly, you are not cleaning the inside of the shaft thoroughly, etc). Epoxy is as strong as it gets [:o]

RE: Glue for Carbon/inserts
 

If you' re using a solvent to clean out the shaft, like denatured alcohol, be sure and let the shafts set overnight to let the stuff dry out before gluing the inserts. I was having a heckuva time with inserts pulling out before the dealer at the shop showed me an Easton (or was it Beman??) tech sheet on gluing inserts. I still lose a few with the superglue stuff, but not a single one with 24-hour epoxy. The quick set epoxies aren' t nearly as good.

RE: Glue for Carbon/inserts
 

Anthony Hunter beat me to it.:D Thats the stuff in the blue and silver container.

If you can get the 24 hour epoxy to work, I still think that I lasts better in the long run.

[Deleted]
 

[Deleted by Admins]

RE: Glue for Carbon/inserts
 

I want to thank everybody for their help. I got a lot of good feed back and Im sure because of it I' ll be able to solve my problem.



Thanks Bob