help with versa cam
 

have a 02 mt sport. it was setup by my local shop. my question is adjusting the draw length and draw stop. when i look at the bow it is a 56" string length, 37.5- 41.5 bc length, the versa cam is a vp2r,the module is a 2, the wheel is a 4 and is 50-60#. the manual says the holes a lettered from a to h, how does this work there are only 4 holes on the cam and 4 holes on the module. the bow has no markings for the draw length. also the tuning chart shows my bows info at 29" with a E-5 position. i need to draw 28" , what holes do i need to use. the tuning chart says the it has 60/75 let off but my manual says 65/80. which one is it. i thought the 5 was the draw stop which determines the amount of let off. i want it at 80 let off. i am asking this because i think the draw stop is in the wrong position

RE: help with versa cam
 

Canadajim, if I am not mistaken you actually need your module in G and your draw stop peg in 7. That is with the Versacam 2 which I shoot at 28" . The drawstop peg may go up one hole or back a hole without hurting the bow or cam. To get G on the module turn the module to the farthest minus position where the holes line-up and then slowly turn it towards the + and count each hole as it aligns. When you get to #7 you should be on G and have one more hole that will align. FYI, the versacam 2 will go from 25" to 28.5" drawlength. Hope this helps. If I can help you more drop me a line. Chris