Go Back  HuntingNet.com Forums > Archery Forums > Technical
Diamond black ice?? >

Diamond black ice??

Technical Find or ask for all the information on setting up, tuning, and shooting your bow. If it's the technical side of archery, you'll find it here.

Diamond black ice??

Old 09-04-2010, 08:44 AM
  #1  
Fork Horn
Thread Starter
 
HUNGAR's Avatar
 
Join Date: Dec 2004
Location: Freeland, Michigan
Posts: 291
Default Diamond black ice??

Just set this up for a friend and shot a hundred or so shots through it. The ATA and BH have moved an 1/8in each and bow only draws 67#'s. I know how to put these back in, but was wondering if anyone knew how to check cam rotation?

I know it says to go by the dots on the cam, but I was wondering if there was another way. I didn't mark and don't remember where the string fell through the dots at when it initially arrived.

Any help is appreciated.

Thanks,
Chris
HUNGAR is offline  
Old 09-05-2010, 09:23 PM
  #2  
Nontypical Buck
 
Join Date: Feb 2003
Location: Vinton VA
Posts: 2,978
Default

Get the ATA and brace height back in spec and the cam should be as well. This is true with most bows in my experience.
5 shot is offline  
Old 09-06-2010, 04:57 AM
  #3  
Spike
 
Join Date: Apr 2010
Posts: 10
Default

Put another 100 or so shots through it to settle the string and cable before the specs are locked it.
454casull is offline  
Old 09-07-2010, 09:05 AM
  #4  
Fork Horn
Thread Starter
 
HUNGAR's Avatar
 
Join Date: Dec 2004
Location: Freeland, Michigan
Posts: 291
Default

Sounds good, thanks guys.
HUNGAR is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.