Pin Nocks help
08-12-2010, 07:27 PM
#1
Boone & Crockett
Thread Starter
Join Date: Feb 2003
Posts: 10,679
Pin Nocks help
Being that we deal 99.99% of the time with hunters I am not up on all of the target accessories.
Does any one know of a pin nock system that will fit into the Easton Axis 300's? The inside diameter of the Axis shaft is .201".
Thanks for the help.
Does any one know of a pin nock system that will fit into the Easton Axis 300's? The inside diameter of the Axis shaft is .201".
Thanks for the help.
08-13-2010, 11:02 AM
#2
Nontypical Buck
Join Date: Mar 2008
Location: Henderson, KY
Posts: 1,760
hmmm im not sure man. What is the ID of ACC's??? Maybe there would be one that would interchange??? The smallest ones I've seen are in my A/C/E's but I know they are too small...
Maybe call Lancaster or Gold Tip or someone and see if they know of any that are compatible.
Maybe call Lancaster or Gold Tip or someone and see if they know of any that are compatible.
08-15-2010, 03:44 PM
#3
Nontypical Buck
Join Date: Feb 2003
Location: Middletown PA United States
Posts: 3,625
I don't know of any personally, but I did do some checking with my spec chart and if you should want to cross reference something you can use these figures:
ACC 2-00
ACC 3L-00
ACC 3-00
Inside diameter for each of these is .200" so if you find any pin nock adapters for these it should be a fairly good fit.
Also check any of the Easton target arrows. ACE, ACG, etc. I have no idea what their inside diameters are, and it's not on the website or in the catalog, but it's worth a look or maybe a phone call.
ACC 2-00
ACC 3L-00
ACC 3-00
Inside diameter for each of these is .200" so if you find any pin nock adapters for these it should be a fairly good fit.
Also check any of the Easton target arrows. ACE, ACG, etc. I have no idea what their inside diameters are, and it's not on the website or in the catalog, but it's worth a look or maybe a phone call.
08-15-2010, 04:11 PM
#4
Giant Nontypical
Join Date: Feb 2003
Location: HENDERSON KY USA
Posts: 6,634
I don't know of any personally, but I did do some checking with my spec chart and if you should want to cross reference something you can use these figures:
ACC 2-00
ACC 3L-00
ACC 3-00
Inside diameter for each of these is .200" so if you find any pin nock adapters for these it should be a fairly good fit.
Also check any of the Easton target arrows. ACE, ACG, etc. I have no idea what their inside diameters are, and it's not on the website or in the catalog, but it's worth a look or maybe a phone call.
ACC 2-00
ACC 3L-00
ACC 3-00
Inside diameter for each of these is .200" so if you find any pin nock adapters for these it should be a fairly good fit.
Also check any of the Easton target arrows. ACE, ACG, etc. I have no idea what their inside diameters are, and it's not on the website or in the catalog, but it's worth a look or maybe a phone call.
I tried that once and they would not tell me dimensions.
I believe Lancaster would yield better results.
