HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   Cutting arrows (https://www.huntingnet.com/forum/technical/303431-cutting-arrows.html)

tremolo 09-13-2009 06:27 AM

How light is too light when talking about hunting arrows? I find it hard to believe that anything wound not have enough Ke/momentum (stored energy) to be an effective deer hunting setup at 60lbs draw with today's bows and arrow selection.

Not trying to start any arguments here just trying to educate myself here and make sure I have an effective hunting setup. Guess we will see when I have the numbers.

Thanks for the help guys.

lifesadrag 09-13-2009 06:33 AM


Originally Posted by constant (Post 3439189)
Does this saw cut arrows good?

I have this saw and it works great with my aluminums and an ASD device.....not sure about carbons though!

brucelanthier 09-13-2009 09:07 AM


Originally Posted by tremolo (Post 3439199)
How light is too light when talking about hunting arrows? I find it hard to believe that anything wound not have enough Ke/momentum (stored energy) to be an effective deer hunting setup at 60lbs draw with today's bows and arrow selection.

Not trying to start any arguments here just trying to educate myself here and make sure I have an effective hunting setup. Guess we will see when I have the numbers.

Thanks for the help guys.

Nothing is to light (with bow manuf. minimums) when the shot is executed perfectly and the shot is placed on the animal perfectly. The difference between the heavier/lighter arrows comes into play when shot execution/placement don't go as planned (of course that never happens :wink:). The heavier, slower arrow is much more forgiving of errant shot execution/placement and outside factors such as wind. IMO light and fast is great when you are flatfooted on the ground and using good form to shoot a target but, when you are up in a tree, twisted around, angling down, cross breeze, heart pounding, etc. I'll take my slow and heavy any day.

live2Draw 09-13-2009 01:21 PM


Originally Posted by constant (Post 3439189)
Does this saw cut arrows good?

Got the Idea For the Saw From GGMAT And I am pretty sure he is cutting carnbons with it. It is the Same speed as the Apple saw, so I am guessing good to go, I have not bought it yet, I am waiting for some fundage

Ed McDonald 09-13-2009 04:53 PM

The saw works great on carbon shafts . You can easily make an arrow cutting jig ...........




The Rev 09-14-2009 04:18 AM

I've been cutting arrows with my dremmel since the advent of carbons, and never had a problem.

mfd1027 09-14-2009 05:13 AM

Tremelo, I think your current setup with the Carbon Express arrows that weigh out rt at 355 grains will be fine for a whitetail hunting rig. Get the numbers for us and we'll go from there.

Dan

Arjuna 09-14-2009 08:00 PM

I have used the dremel and it was fine, just hard to keep straight. I bought one of the harbor freight saws and it is fine. It is a little slower than the dremel, but works fine if you take your time. My rig looks a lot like the ones pictured.

Bernie P. 09-15-2009 06:14 AM

tremolo everyone has their own views on arrow weight.I prefer a min of 450grs for any animal.Both for ensuring adequate penetration and being easier on the bow.

tremolo 09-16-2009 08:33 AM

Well got the arrows cut and shot at the shop yesterday. Arrows weigh in at 374gr. and shot 250fps. calculated to 52 ft. lbs.


All times are GMT -8. The time now is 09:21 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.