carbon or aluminum?
#1
Spike
Thread Starter
Join Date: Dec 2007
Location: Dover DE
Posts: 88
carbon or aluminum?
Another new guy question. I see that carbon arrows are the norm nowadays, but after looking at specs for comparatively priced aluminum arrows, it looks like you get more uniformity with aluminum for the same price point. That being said, what is the main advantage of carbon over aluminum or vise versa?
#4
Guest
Posts: n/a
RE: carbon or aluminum?
I shoot carbons out of my compounds, aluminums and cedar from trad bows.As a longtime fanboy of aluminums, I say go with carbons. alum's are going away slowly but surely. Writing is on the wall. Lots of pro's with aluminums. With alums, you can heat to remove inserts, alum's are much more consistent with spine, alum's are heavier (this is a strength not a weakness). But the business is moving away from em.
#5
RE: carbon or aluminum?
Another thing is that aluminum arrows fit a narrower range of draw weight/draw length parameters. You choose a 28" aluminum and it shoots well. Jack up the poundage 5# and you probably need to change to a stiffer arrow. Carbons may allow you to change draw weight by 10-20 lbs and still work. With carbon you don't need to own an arrow straightener.
Spine deviation is an issue with carbon, but is still acceptable for most situations. At least it's good still better than most of us can shoot anyway.
Spine deviation is an issue with carbon, but is still acceptable for most situations. At least it's good still better than most of us can shoot anyway.
#7
Spike
Join Date: Mar 2009
Posts: 41
RE: carbon or aluminum?
I shot aluminums for a long time and got tired of if you hit something wrong or shot a deer that arrow was done because it would be bent usually. I shot carbons now and I have only broke 2 and one I robin hooded and the other I almost robin hooded I have had a neighbor who shoots the trophy ridge carbons which are good and durable shoot it through a cinder block with only minnor scratches nothing that affects how it flies. It is just a personal preference but yes the industry is moving away from aluminums. Look at Bass Pro Carbon Furries or Cabela's Stalker extreme arrows if you are on a budget but want pretty good carbons
#9
Typical Buck
Join Date: Jan 2004
Location:
Posts: 549
RE: carbon or aluminum?
I've always preferred the weight for penetration especially for elk. But i'm new to the carbon world so I really can't say. I know a miss on a target that hits a rock pretty much has the same effect on the arrow, it's a dead soldier. Time will tell for me. I trully don't know but my ole alums were always on the money.
#10
RE: carbon or aluminum?
ORIGINAL: cherokee_outfitters
I've always preferred the weight for penetration especially for elk. But i'm new to the carbon world so I really can't say. I know a miss on a target that hits a rock pretty much has the same effect on the arrow, it's a dead soldier. Time will tell for me. I trully don't know but my ole alums were always on the money.
I've always preferred the weight for penetration especially for elk. But i'm new to the carbon world so I really can't say. I know a miss on a target that hits a rock pretty much has the same effect on the arrow, it's a dead soldier. Time will tell for me. I trully don't know but my ole alums were always on the money.