HuntingNet.com Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   Bowpress (https://www.huntingnet.com/forum/technical/275722-bowpress.html)

walks with a gimp 11-29-2008 04:32 PM
RE: Bowpress
 
ORIGINAL: bigcountry

ORIGINAL: kwilson16

I made my own based on the Bowmender design. I used 1.25" x .25" steel bar with 0.5" holes drilled through. Added a quality rachet strap and it presses everything - split limb or otherwise.
I sure wouldn't press acenter pivot designed bow. Youare onlysupposed to press the main ends of the limb on mostsplit limb center pivot bowtechs.
Like this.

Antler Eater 12-01-2008 09:22 AM
RE: Bowpress
 
....So Gimp what do we have to do to bribe you to make one of those available to the rest of us flunkies?:D

Dopler 12-01-2008 09:49 AM
RE: Bowpress
 
I have a bowpress in my garage but in a pinch a tie down ratchet works, hook the rubber hooks on the cams and winch it until pressed, works like a charm.


All times are GMT -8. The time now is 02:41 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.