RE: Will I be spined properly?
 

OOPS , missed that. BC , I dont know much about bowtech so would that be considered 2 cam , hard soft or medium then, I am not sure. But I will guarantee he will not be underspined because a couple of friends of mine shoot the same arrow at 70 lbs with a longer draw length and arrow and they have harvested many African and New Zealand animals with the same arrows. But if you can give which type cam it will be called I will rerun the numbers.

RE: Will I be spined properly?
 

I downloaded the OT2 this morning and run the numbers and I should be just fine with the pro hunter 7595's. I forget the exact arrow length, but it was some where around 28 inches.

RE: Will I be spined properly?
 

Don't worry about the cam. Just go into the database and pick the bow. If you own OT, its fairly easy. Any arrow will work with anything. Just on here, we kinda like to pick optimal.

RE: Will I be spined properly?
 

BC, that is what I did and that is what it put in the cam box. I do know that the person that owns OT2 has said that for Hoyt's Cam 1/2 that it will put it in as 1 cam , hard. I am not sure if this isnt why it did this for this bow also , perhaps though. I know about the Hoyt part because I emailed him when I noticed it when I used it for my Hoyt's and that is what he emailed me back. So perhaps that it why it did it on this instance also. But anyway as you said he will be fine with it.