HuntingNet.com Forums - mathews cam issue

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Technical (https://www.huntingnet.com/forum/technical-20/)

- - mathews cam issue (https://www.huntingnet.com/forum/technical/268038-mathews-cam-issue.html)

mcorso

10-14-2008 12:25 PM

mathews cam issue

hey gang, has anyone noticed or heard of the bottom cam being offset to the right a little bit? i noticed yesterday that mine is , its shooting good, just wondering if I should be concerned,, any input is welcomed. thanks

stalkingbear

10-14-2008 12:52 PM

RE: mathews cam issue

Sounds like you are experiencing cam lean. It's not a major problem. Go to your local mathews dealer and they'll be able to fix you up.

BOWHUNTERCOP

10-14-2008 05:31 PM

RE: mathews cam issue

stalkingbear is correct, simple repair

Dryridge

10-15-2008 12:35 AM

RE: mathews cam issue

MCORSO.....Do not run to the shopyou bow is fine. Some of the Mathews models did indeed set a hair to the right in the limb cutout. They did that to alignthe string. if you notice the cam is wide and has 3 tracks on it. The string comes offcenter and this was done to compensate for it.

Just keep enjoying it shooting well.

mcorso

10-15-2008 09:37 AM

RE: mathews cam issue

ok, thanks guys,, I took it up yesterday and he said it was not uncommon, he shot it and said hunt ,shoot, you will fine, just keep a eye on it if it gets worse he would make corrections, thanks again guys

All times are GMT -8. The time now is 12:57 PM.