HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   Can somebody run these numbers for me? (https://www.huntingnet.com/forum/technical/262800-can-somebody-run-these-numbers-me.html)

mobow 09-12-2008 11:00 AM

Can somebody run these numbers for me?
 
XX78 SuperSlam, 28" with 4" feathers and 100 grain points....Coming off of a 2008 VectrixPlus set at 71 #'s w/ a 30" draw.

I've got this damn wiggle I can't get rid of, and I'm thinking it may be spine related. If someone w/ OT2 could run those for me, I would really, really appreciate it. Thanks in advance.

EDIT: Duuuhhhhh......it's a 2512.

brucelanthier 09-12-2008 12:10 PM

RE: Can somebody run these numbers for me?
 
I ran it in AA and OT2(hunting box checked)and both have your spine in the optimum range. While I don't think you have a bad FOC (11.5%)you may want to try a 125 grain point and see what happens. A little higher FOC may be just what you need to give that last little bit of stabilization and it still keeps you in the optimum spine range.

OHbowhntr 09-12-2008 12:19 PM

RE: Can somebody run these numbers for me?
 

ORIGINAL: brucelanthier

I ran it in AA and OT2(hunting box checked)and both have your spine in the optimum range. While I don't think you have a bad FOC (11.5%)you may want to try a 125 grain point and see what happens. A little higher FOC may be just what you need to give that last little bit of stabilization and it still keeps you in the optimum spine range.
+1, I can't add anything to this!!!

mobow 09-12-2008 12:39 PM

RE: Can somebody run these numbers for me?
 
Well.....[:@][:@] Thanks for running that, I appreciate it.

Jason Cuda 09-12-2008 04:49 PM

RE: Can somebody run these numbers for me?
 
Stupid question from me, but did you paper tune the bow good? I used to shoot the same shaft combo a while back, and I did ok with the 100 grain head, due to the fact that your inserts (aluminum) weigh in at @ 40+ grains. I would take a good look at the rest. Also, I assume you are shooting a release.

Good luck, I hope you get "straightened" out!!!

Jason


All times are GMT -8. The time now is 09:28 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.