RE: Basic Mech broadhead ?
 

Sheesh ! hard crowd :)

I had "heard" that you can "band" the Mech broadheads closed for practicing ?????? so they will not open on impact.

Not like I was shooting through a rasberry bush, 3 times it was a lone, small twig, not visible to the eye.

Thanks,
Slack

RE: Basic Mech broadhead ?
 

You may be able to band the forwardfacing blades so that they do not fold back on impact. Not sure about that though. Not sure what to do on rear deployment though.

Also, I have no problem with a person practicing real world sort of shots. You concentrate more and also it makes you notice everything that could come into play and there are definitely a lot of twigs hiding outin the woods that most people do not even see until after the arrow is gone.

RE: Basic Mech broadhead ?
 

I wasn't trying to be harsh. Just saying that a mechanical isn't going to help you out with twigs and you gotta make sure they aren't there all together if you want to "fix" that problem.


You can tape up the mechanical heads but you then add weight to the broadhead and instead of making a nice slice in the target it will then rip and tear the target.

I suggest that instead ofpracticing all the timewith your broadheads simply just shoot several to verify where they are impactingand if they are impacting with your field tips you are good to go and go back to field tips and put sharp blades in the broadheads for hunting. Every now and then during the season shoot a few broadheads to verify they are still going where they are suppose to and keep hunting.

RE: Basic Mech broadhead ?
 

bigbulls makes a point about practicing with the broadheads. Once mine are dialed in I go back to field tips and may just shoot the broadheads again right before season and every once in a while during the season.

I actually have 2 sets of broadheads though. One set for practice and one for hunting so that I do not have to worry about sharpening or replacing blades after practice and ifI ever need an extra head or 2 I can use my practice tips with new blades.

RE: Basic Mech broadhead ?
 

I like vortex mechanicals but shoot fixed heads nowadays , the rage and snypers look like a good design , just dont get too large a cutting diameter

RE: Basic Mech broadhead ?
 

I sure hope you meant 4-5lbs of KE.:D Sorry, I couldn't resist. After seeing personally the devastation they do on hogs, I would say that they are a solid choice.

RE: Basic Mech broadhead ?
 

Aside from the BH performance, the end of that video shows how beneficial an STS would be on a bow to stop that string from vibrating!!!!

RE: Basic Mech broadhead ?
 

No, I did mean 45#'s that is what your bow needs to have for K.E. for the heads to consistently open.

RE: Basic Mech broadhead ?
 

I'm sorry, I could see where 45lbs KE being the recommended minimum to hunt with (actually, I think NAP recommends 50lbsKE). But 45lbs KE to get the blades to consistently open? Nobody in their right mind would hunt with a broadhead like that. I've reviewed testing that showed the Spitfire to consistentlyfully open w/ no deflection on pork ribs set at an angle. The setup used produced a whopping 18ft.lbs of KE.

RE: Basic Mech broadhead ?
 

I would also look at the Innerloc EXP 2 or 3 blade expandables. They open a bit faster than Spitfires, and changing the blades out is way easier as well.