cable slide questions
3 parts/questions
1. how do i swap them out? 2. are the stock bowtech slides good quality? 3. if i do swap will i need to retune anything? thanks for any helpfull replies |
RE: cable slide questions
I use the Hyper Glide Slide on my Bows that require a cable slide.
Dan |
RE: cable slide questions
Pull the old one off by sliding it off the guard. It's easier with a bow press to relieve some tention, but doable with one. Don't know about the stock bowtech ones, but I always but a simms teflon slide on all my bows. It saves a lot of wear and tear tear on the cables and helps to quieten the bow down some.
|
RE: cable slide questions
Bowtech slides don't give you much clearance for vanes, espa Blazer. I swapped mine for a Simms teflon slide and made a big difference on arrwo clearance with my Allegiance.
You can do it without a press but it isn't easy and really helps if you have somone else to help you pull on the cables. If you are doing it alone wear leather gloves, you REALLY have to pull. |
RE: cable slide questions
If I were going to put one on without a press I would back the limb bolts out as much as possible first.
|
All times are GMT -8. The time now is 06:23 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.