HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   bowtech s/c timeing (https://www.huntingnet.com/forum/technical/25451-bowtech-s-c-timeing.html)

oscarg 03-06-2003 05:26 AM

bowtech s/c timeing
 

does bowtech have marks on it s cam like some others to show where best performance is ?

bigcountry25 03-06-2003 07:28 AM

RE: bowtech s/c timeing
 
The Mighty Mite and Patriot singles I have owned did have timing markes on them as well as both the Pro38' s I have had and my brothers new Patriot dually has them as well. They put them on with what looks like a magic marker. Kind of hard to see but it is there. Also there owners manual had a measurement you take from a bolt on the cam to limb on the singles to check timing or posiotion.

ChiefHeadhunter 03-06-2003 08:09 AM

RE: bowtech s/c timeing
 
Are the 2003 owners manuals available yet?
-Chief

formula1 03-06-2003 01:41 PM

RE: bowtech s/c timeing
 
The 2003 VFT has timing marks on the cam, as does the 2002 Extreme Solo. They are little black majic marker type lines that can be seen in the right light.

My 2003 VFT came with a note that the 03 Owner' s Manuals are not available yet due to printing issues.

ChiefHeadhunter 03-06-2003 02:09 PM

RE: bowtech s/c timeing
 
Thanks for the info formula1.

Did anyone get a note with thier bow saying someof the target models would not be available yet due to issues with suppy and demand[:o];)?

Welcome to the board formula1. I hope you like it here!

-Chief

oscarg 03-06-2003 05:14 PM

RE: bowtech s/c timeing
 

I am still waiting on my owners manual . So can someone tell me how these marker marks should line up

Kanga 03-06-2003 07:54 PM

RE: bowtech s/c timeing
 
The marker marks on the cam so you have one mark on both sides of the limb

Deleted User 03-07-2003 05:07 AM

[Deleted]
 
[Deleted by Admins]

BowTech_Shooter 03-07-2003 05:46 AM

RE: bowtech s/c timeing
 
The 2003 owners manuals aren' t quite ready.

If anyone needs to know the timing measurments for their bow, email me with the bow model, model year and brace height if it was offered in two options.

I' ll get you the measurments ASAP.

Regards, Pat

formula1 03-07-2003 06:01 AM

RE: bowtech s/c timeing
 
ChiefHeadHunter:

I am a new member, but a long time reader of the forum. It' s one of the ways I did research for my recent bow purchase. I enjoy the forum, but as with any forum, you have all kinds of folks on board. But it doesn' t take you long to figure out those who are sensible in their approach.

I was as PSE owner and fan until I looked at Bowtech. I must credit my son with the interest in Bowtech as he has an 02' Extreme Solo. After much testing (PSE, Mathews,Hoyt,Bowtech,Fred Bear), I settled on the 03' Extreme VFT. In the end it was between a Hoyt Razortec and two Bowtechs (the VFT and the Pat DC). I thought I was going to buy the Pat DC, but chose the VFT. I shot all three side-by-side. For me, I just thought the VFT was a better fit for hunting(I don' t target shoot yet). I didn' t choose the Pat DC because of the short valley. It just seemed to me that in hunting situations (strange angles, etc.), the short valley could be an issue. I really liked the Razortec, too, but I was just as comfortable with the feel of the VFT, and it was considerably faster. So I now am the proud owner of a 70 lb./29" Extreme VFT (306 fps at 367 grains)


All times are GMT -8. The time now is 11:10 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.