2001 Pro 38 Draw Length ?
 

A friend just bought a used 2001 Pro 38 and needs a 31 inch draw.It came with to mods, DS2,BT2 are either of these for the 31 inch draw?Also where does the cam stop need to be for 31 inch and 80% thanks

RE: 2001 Pro 38 Draw Length ?
 

What mod the bow needs depends on the which brace height option the bow is. I would e-mail the tech at bowtech AKA bowtechshooter on this board or call Bowtech Monday to find out for sure. Be sure and measure the brace height befor you call so they will know which mod you need. The BT mod is for the BT cam not the infinity cam.

RE: 2001 Pro 38 Draw Length ?
 

I replied to your question earlier on Bowsite but here it is here too.

The 2001 Pro 38 takes a DS or BT (depending on which cam it has on it) #1 module for 31" draw.

The stop would be set with the middle of the screw head set on the 3rd mark up from the bottom (L) end of the cam.

RE: 2001 Pro 38 Draw Length ?
 

The bow has the Infinity cam so it needs the DT1 right?

RE: 2001 Pro 38 Draw Length ?
 

DS#1

RE: 2001 Pro 38 Draw Length ?
 

Thanks:D