Being slightly out of spec...
I took the time out today to measure and make notes on my bow, rest, and sight settings. I found my ata and brace are both 1/8" off. I have a hunt coming up in 2 1/2 weeks. Question is do I up twist everything back to spec now or wait until after the hunt to start screwing around?
|
RE: Being slightly out of spec...
if its shooting good right now i would leave it alone
|
RE: Being slightly out of spec...
Sometimes a bow should be out of spec slightly due to where the bow's poundage and draw length is set.
Specs are usually given at a specific draw and poundage setting. IMO,if all is well,shoot it and forget about it. |
RE: Being slightly out of spec...
ORIGINAL: TFOX Sometimes a bow should be out of spec slightly due to where the bow's poundage and draw length is set. Specs are usually given at a specific draw and poundage setting. IMO,if all is well,shoot it and forget about it. Specs are just a guide line, not an absolute;) Dan |
RE: Being slightly out of spec...
What TFox and Dan said!!!
|
RE: Being slightly out of spec...
I agree with Mean V and Dan as well ,spec's are just a reference point ,no 2 bow's will be exactly as the other .Don't sweat it if it's shooting fine and go hunting .
nubo |
All times are GMT -8. The time now is 05:31 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.