removing arrow stickers?
 

i just got a dozen carbon supreme arrows by redhead from bass pro. they came with some plastic sticker things around them and im not sure if im suppoesed to take them off and if i am how do i take them off?

here are 2 pictures of them

RE: removing arrow stickers?
 

I had some real old easton xx75's that had the barcode stickers on them. Basically I just ripped them off as bestI could but it left that sticky residue so I held them over the sink or outside works and sprayed the affected area with WD40 let it soak in for a little bit then rub it off.

RE: removing arrow stickers?
 

no need to tak em off.:D

RE: removing arrow stickers?
 

so leave em on?

RE: removing arrow stickers?
 

Yea, dont take them off.

RE: removing arrow stickers?
 

why?

RE: removing arrow stickers?
 

If you want to take them off soak the arrow in cold soapy water for a couple of hours then use a scouring pad but dont press to hard otherwise you will scratch up the shaft.;)

RE: removing arrow stickers?
 

Well...I guess you can if you really want to;) But there is no need to.

If you want to just follow Kanga's instructions

RE: removing arrow stickers?
 

I used Goo Gone Extreme. It's cheap and works quickly. Some people may advise against this because it may cause the carbon fiber to split/fray. Try it on one and if there is no problem, go for it. Just but it on a rag and rub for a few seconds. It's gone! To back this up, I took some pictures of my arrows, which are not frayed at all. They were Carbon Express Maxima 350 3D selects, which have a similar red logo. The Goo Gone Extreme did the trick. The only problem I had with the stuff was the smell, so I recommend that you do it outside. There will be no sticky residue. It may temporarily discolor them (slightly lighter), but that goes away after a month or so. You will notice that my arrows are completely black. Just don't miss. You will never find these until you get the lawn mower out. Haha!

RE: removing arrow stickers?
 

I am having problems posting my pictures. That is what all the edits are for. You may just have to take my word for it.