HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   36" draw?? (https://www.huntingnet.com/forum/technical/248831-36-draw.html)

joshw020 06-09-2008 07:25 PM

36" draw??
 
I was browsing through some bows on ebay and came across a bowtech Ally. The lister doesn't appear to be an archer, just a seller. The draw length is listed at 36". . .is that even possible?? I don't recall seeing a draw length longer than 31. . .but I'm no expert by any means.

Kanga 06-09-2008 07:27 PM

RE: 36" draw??
 

The draw length is listed at 36". . .is that even possible??
nope

Vabowman 06-09-2008 07:32 PM

RE: 36" draw??
 
yes it is, I believe Shaq is somewhere close to that. seriously. no joke.

Roskoe 06-09-2008 07:39 PM

RE: 36" draw??
 
I've seen them do that several times - get the ATA cornfused with the draw length.

joshw020 06-09-2008 07:41 PM

RE: 36" draw??
 
lMAO :D. . .thanx Va, a week ago you had me questioning my decision to buy a QAD pro AFTER I ordered it, lol. . .and now this!. . .cuz I already bought the bow [8D]. . .I had no choice but to assume it was either a typo or misinformation from the sellers lack ofknowledge about the bow (which was also evident in the price I paid for it;))

joshw020 06-09-2008 07:46 PM

RE: 36" draw??
 

ORIGINAL: Roskoe

I've seen them do that several times - get the ATA cornfused with the draw length.
exactly what I was thinking Roskoe . . I'm a Hoyt guy with no idea of the ATAlength on any model of bowthech. . . soI made the same assumption

Rory/MO 06-09-2008 09:09 PM

RE: 36" draw??
 
ya im thinking its the ATA too, but im not too familiar with the bowtech specs

JimPic 06-10-2008 05:19 AM

RE: 36" draw??
 
I have a longbow that was made for someone else and it's 63#@32" --and this guy is big--longest draw I've ever seen

KodiakArcher 06-10-2008 01:52 PM

RE: 36" draw??
 
The Ally only goes up to 30.5" draw I believe. That is ATA that they listed. I've never seen a commercially available draw length over 32" and even that is hard to find. Anything above that would have to be custom.

Matt/TN 06-10-2008 03:17 PM

RE: 36" draw??
 
So I did a little snooping around on Ebay and I found the bow you bought. I'm thinking you might have made a little bit of a mistake. Yes it's a decent price but I don't think you should have bought the bow without knowing the draw length. THe model Allegiance you bought is an 05'. The 05' model Allegiance's, you can't adjust the draw length without adjusting the cams. Being that it is an 05', I'm not sure just how hard it will be to locate the correct cams you need in order to adjust the draw length. Just an FYI ;)


BTW, you got a "decent" deal. It's a 2005 model bow. They go pretty cheap now days.


All times are GMT -8. The time now is 05:36 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.