General and Bow Press
#11
Guest
Posts: n/a
RE: General and Bow Press
ORIGINAL: y2khog
What press will work with the 82nd and the General?
What press will work with the 82nd and the General?
#14
Guest
Posts: n/a
RE: General and Bow Press
ORIGINAL: y2khog
Hey BigCountry, would you be able to change a string or mods with that press? What about the Omni with the adapters?
Hey BigCountry, would you be able to change a string or mods with that press? What about the Omni with the adapters?
#15
RE: General and Bow Press
I actually emailed my contact at bowtech before i purchased my omni, shown him pictures that I was sent, he said all looked good, presses the bow very simular to the Last Chance that he recommendend.
#18
Guest
Posts: n/a
RE: General and Bow Press
Well, if you make sure to pushing on or above the limb where the cam is, I see no harm in the omni. Unless you press to much and the limbs slip out. Do you lay the bow riser on top of the riser rods (whatever you call em) or below like a older deflex bow?
#19
RE: General and Bow Press
I have wraped the Rods that are for the riser so that it fits snug in the "y" of the riser, it holds the riser steady but with no strain on the riser on those points when pressed, just the limbs. works really well.