|
Elite's New Cam System
Elite's new cam system is a two track Binary system. According toElite 0 cam lean. Lets try to keep this civil, what do you guys think of the two track Binary System?
No DL mods, Lengths are Cam specfic Draw stop on Each Cam |
RE: Elite's New Cam System
I'd have to see it and shootfirst. I assume this will be on their new 2009 bows?
As a shop manager that has to set up bows and keep inventory I hate draw length specific cams. My bow inventory with draw length specific bows is 5 times what it needs to be. As a shooterI wouldn't have a draw length specific cam that I couldn't fine tune, hopefully there is at least a half inch of adjustment of some kind built into the cam system. |
RE: Elite's New Cam System
ORIGINAL: bigbulls I'd have to see it and shootfirst. I assume this will be on their new 2009 bows? As a shop manager that has to set up bows and keep inventory I hate draw length specific cams. My bow inventory with draw length specific bows is 5 times what it needs to be. As a shooterI wouldn't have a draw length specific cam that I couldn't fine tune, hopefully there is at least a half inch of adjustment of some kind built into the cam system. |
RE: Elite's New Cam System
ORIGINAL: bigbulls As a shooterI wouldn't have a draw length specific cam that I couldn't fine tune, hopefully there is at least a half inch of adjustment of some kind built into the cam system. Agreed. Why do manufacturers do this? I have to come to the conclusion that they are interested in selling more stuff, not satisfying customers the first time around. For years we've been told to hold our breath for the latest cam system that's supposedly light years ahead of the past ones, and then they don't even have draw length adjustability. You can't tell me we're not going backward. I'm not picking on Elite here; all the manufacturers do it. |
RE: Elite's New Cam System
Elite says they will make it easy on dealer's to change DL. They will provide the dealers w/ enough cams to make the changes.
Agreat advantage of this camis that they can be fine tuned to allow for DL requirements in the 1/8" to 1/4" range and still tune properly. All binarys have this capability if you know how to do it. DL's are running 1/8" short in most cases. In other words, a 28" DL will MEASURE 27 7/8", so keep that in mind. Cams are availiblein 1/2" incriments. |
RE: Elite's New Cam System
They will provide the dealers w/ enough cams to make the changes. We only would have to press the bow, remove the strings and cables, remove the axles, remove the cams, and then put it all back together and readjust the strings. Quick and easy. :eek:[&:] |
RE: Elite's New Cam System
It isn't that tough ...3 minutes.
 |
RE: Elite's New Cam System
ORIGINAL: archer58 It isn't that tough ...3 minutes. |
RE: Elite's New Cam System
ORIGINAL: Germ ORIGINAL: archer58 It isn't that tough ...3 minutes. |
RE: Elite's New Cam System
ORIGINAL: archer58 ORIGINAL: Germ ORIGINAL: archer58 It isn't that tough ...3 minutes. |
| All times are GMT -8. The time now is 07:45 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.