How big is your peep?
#1
Fork Horn
Thread Starter
Join Date: Feb 2008
Posts: 217
How big is your peep?
Hey all,
I was wondering what size peep you use because I am using a Meta Peep Large hunter and I am having a heck of a time focusig on a target. I think I should move to a smaller peep to get better focus.
I was wondering what size peep you use because I am using a Meta Peep Large hunter and I am having a heck of a time focusig on a target. I think I should move to a smaller peep to get better focus.
#2
Guest
Posts: n/a
RE: How big is your peep?
Depends on the size of your sight. That should dictate the size. For my Extreme sight, I had to use a 3/16". But with my copper johns, I think I used a 5/16". The outer ring should be fitting the peep when looking thru, and you should be only focusing on the pins. If not, you might want to work on head position and anchor points.
#5
RE: How big is your peep?
I drill mine out to the point the peep almost collapse....Not sure what size that is but it is really big...This is on my hunting set-up....I use a small one on my tourny rig....I have had a couple times while hunting I could see the deer and my pins but not all at the same time, so I started drilling them out after that....has worked well..
#6
RE: How big is your peep?
I use the String Splitter Mini. It is REALLY nice. I can't imagine using the bigger versions of the String Splitter because they would be so big. You can see everything through it. No blurring of things that shouldn't, no loss in accuracy, and extremely good low light shooting ability.