Bowtech allegiance string/cable question
 

Looking over my new bow last nite and I see that the serving around the cables by the cams (top and bottom) is looking a bit on the ragged side. Probably have a max of 100 shots on the bow and that is being generous in the estimate.

The serving has seperated in spots wide enough that I can see the two colors of the bow string (brown and green)

Is this normal?










If this is not acceptable what are my options?

RE: Bowtech allegiance string/cable question
 

It's not normal to happen on an end loop serving like that. The only thing I can think of is that there's a burr on the peg that cut the serving. Better take it off and check 'cause it'll be cutting the string next... Otherwise I wouldn't worry about it. Many strings don't even have serving there.

RE: Bowtech allegiance string/cable question
 

My Ally is doing it around the cam but not at the end loop. I would be a bit wary of that.

RE: Bowtech allegiance string/cable question
 

Check your PM box.

RE: Bowtech allegiance string/cable question
 

Thanks for the input folks.

Will have to make a trip out to the shop and see what the guy says, got a funny feeling that he will say "that is how it is supposed to look like"

RE: Bowtech allegiance string/cable question
 

Your loops should not separate like that. I shot over 300 shots a week last year out of my Ally and the end loops have only a little separation. There is not reason for the serving to separate there unlessthe loop is malfunctioning.