|
RE: For those with Binary cams
ORIGINAL: Greg / MO Thoughts on Kevin's statement slightly prior to 3:30 of the video about "proper AMO drawlength is measured from where the bow bottoms out in holding weight... NOT to how far you can draw the bow back"? |
RE: For those with Binary cams
I do something different. I just don't see the need for a draw board. I can see a full draw tool on the apple press handy. But I have a hook in my garage, and I pull the bow to full length and watch what is happening. That way, I can be sure I don't overdraw, and its only a hook. I also put a hook in the floor with the plans of putting a ratchet strap on it to hold the bow at full draw, but I just don't trust that.
If I need to use my spot hogg laser to check cam lean, I get someone to hold it for me. |
RE: For those with Binary cams
ORIGINAL: bigcountry I do something different. I just don't see the need for a draw board. I can see a full draw tool on the apple press handy. But I have a hook in my garage, and I pull the bow to full length and watch what is happening. That way, I can be sure I don't overdraw, and its only a hook. I also put a hook in the floor with the plans of putting a ratchet strap on it to hold the bow at full draw, but I just don't trust that. If I need to use my spot hogg laser to check cam lean, I get someone to hold it for me. |
RE: For those with Binary cams
Do you guys set your timing at full draw with the stops hitting at the same time? I have never tried but always wondered if creep tuning worked on binary. Its hard to creep on a binary cam however. Not like bows of the past.
|
RE: For those with Binary cams
Bows with no limb peg stop can be overdrawn 1/4" to 1/2" past this point easily. |
RE: For those with Binary cams
ORIGINAL: bigcountry Do you guys set your timing at full draw with the stops hitting at the same time? I have never tried but always wondered if creep tuning worked on binary. Its hard to creep on a binary cam however. Not like bows of the past. |
RE: For those with Binary cams
ORIGINAL: ducsauce ORIGINAL: bigcountry Do you guys set your timing at full draw with the stops hitting at the same time? I have never tried but always wondered if creep tuning worked on binary. Its hard to creep on a binary cam however. Not like bows of the past. If you see that article I wouldn't mind reading it. |
RE: For those with Binary cams
If I come across it, I'll let you know. The commander has a draw stop peg, right? I know on my tribute if I try to creep my arm will come out of socket.
|
RE: For those with Binary cams
Just a quick question about binary cams and timing, I thought that the binarys would always stay in time due to design and take-up positioning,I wasn't worried withmy Diamond, being a single cam. Its not a problem I've had to address before. Just wonder'n
|
RE: For those with Binary cams
Bowdaddy64: A binary can go out of synch if a cable touches one draw stop before the other. Keep in mind you've got 3 draw stops, one on each cam (built into the module) and the moveable draw stop peg.
For those interested: http://www.archerytalk.com/vb/showthread.php?t=626255. |
| All times are GMT -8. The time now is 07:05 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.