RE: tuning problem
 

I think it has been pretty well covered, but just out of curiosity, are the cables between the tuning marks, or has one of them gotten out of the marks?

RE: tuning problem
 

one end is dead center in the marks and the other is of to the side a little but both are between the marks.. i shot it through paper today. i got bullet holes. i powder tuned it no fletching contact. i shot it with some diffrent arrows.. gold tip 3555s,carbon express terminator hunter 4560s,easton 2117,and easton 2315 everyone had the same point of impact side to side. i also shot with my normal arrows and payed real close attention to the bubble and my bow is level when i shoot. and i am shooting open handed and with how small the grip is on this bow there is no way i am torking it.. so i dont know what it is.

RE: tuning problem
 

also it is just barley touching my face i tried some diffrent snchore point and it didnt change the side to side.

RE: tuning problem
 

Someone once said there' s no such thing as a stupid question , so here goes:D
Do you have a sight that has the windage adjustment by moving the sight pin only? The majority of the new sights allow you to move the entire bracket for windage adjustments while leaving the sight pin centered in the pin guard. If you dont have that style I' d suggest getting one.

RE: tuning problem
 

Move your rest to the right.

RE: tuning problem
 

Another stupid question: If you shoot with both eyes open like you should, have you checked your eye dominance? Sounds like you could be shooting right handed, but sighting with your left eye. Try closing your left eye and see what happens.

RE: tuning problem
 

im not sure what you mean bowfanatic. i am useing a one pin ajustable sight.

i am right eye dominate but i will try what you are saying .. my center shot is on.

RE: tuning problem
 

Pup,

Measure your centershot and tillers and get back to me.

RE: tuning problem
 

if cenetr shot is what i think it is i am getting 3/4 in does that sound right im not sure what the tiller is refrech my memory. thanks for all the help so fare.

RE: tuning problem
 

My centershot measures 3/4 in. The tiller measures 8 5/8 top and bottom.
Brace height measures 7 3/16.