Kisser Button Question
03-16-2008 | 12:07 PM
#1
Thread Starter
Joined: Aug 2007
Posts: 62
Likes: 0
From:
Kisser Button Question
My kisser button when i set it up is about 1 inch above the D loop is that bad? And if so what is the reason because I have my Sight maxed out all the way up pretty much and my peep sight seems to be a little on the low side but not sure. Any help would be appreciated.
03-17-2008 | 02:16 PM
#7
Fork Horn
Joined: Mar 2008
Posts: 150
Likes: 0
From: Michigan
RE: Kisser Button Question
Yes, I used a kisser with no peep until recently. I didnt care for peeps, but at least a kisser button, gave me one certain anchor point. Since I have put the peep on I am shooting way more accurate, I wish I would have done it earlier.
03-17-2008 | 02:46 PM
#8
Nontypical Buck
Joined: Oct 2007
Posts: 1,375
Likes: 0
From: Wentzville, MO
RE: Kisser Button Question
ORIGINAL: mystryak
My kisser button when i set it up is about 1 inch above the D loop is that bad? And if so what is the reason because I have my Sight maxed out all the way up pretty much and my peep sight seems to be a little on the low side but not sure. Any help would be appreciated.
My kisser button when i set it up is about 1 inch above the D loop is that bad? And if so what is the reason because I have my Sight maxed out all the way up pretty much and my peep sight seems to be a little on the low side but not sure. Any help would be appreciated.
Are you still shooting high with the site maxed out? If so, check to see if your rest and knock point are properly alligned. If not, once that is fixed you may have to move the peep and kisser.
