![]() |
Kisser Button Question
My kisser button when i set it up is about 1 inch above the D loop is that bad? And if so what is the reason because I have my Sight maxed out all the way up pretty much and my peep sight seems to be a little on the low side but not sure. Any help would be appreciated.
|
RE: Kisser Button Question
its my understanding that you place the kisser in the corner of your mouth with your natural anchor point,where ever it is on the string , but I dont use a kisser
|
RE: Kisser Button Question
I think mine is too..an 1" above;)
|
RE: Kisser Button Question
most guys I setup with a peep it seems it generally lands around 1" to 1 1/4"
Dan |
RE: Kisser Button Question
Put it where its comfortable. Where it ends up really isn't too big a deal unless you have such an odd anchor point that you run out of adjustment.
|
RE: Kisser Button Question
What if you use a kisser and no peep is this workable?
|
RE: Kisser Button Question
Yes, I used a kisser with no peep until recently. I didnt care for peeps, but at least a kisser button, gave me one certain anchor point. Since I have put the peep on I am shooting way more accurate, I wish I would have done it earlier.
|
RE: Kisser Button Question
ORIGINAL: mystryak My kisser button when i set it up is about 1 inch above the D loop is that bad? And if so what is the reason because I have my Sight maxed out all the way up pretty much and my peep sight seems to be a little on the low side but not sure. Any help would be appreciated. Are you still shooting high with the site maxed out? If so, check to see if your rest and knock point are properly alligned. If not, once that is fixed you may have to move the peep and kisser. |
| All times are GMT -8. The time now is 01:15 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.