|
Serving a Static Yoke....
Well, I got about half way through tuning my Hoyt Trykon and realized, I am having difficulty when untwisting my buss cable because of the static yoke.
My question is....should I serve about two inchesbelow the static yoke so I can control the cam lean with the static yoke yet still have the ability to untwist the buss cable when necessary? I am thinking that isthe only way I can keep the yoke in the cable and still havethe ability to untwist the cable. Wanted to check here first..... |
RE: Serving a Static Yoke....
That will help,but imo,you need to get new rigging that doesn't have the floating yoke.
|
RE: Serving a Static Yoke....
ORIGINAL: TFOX That will help,but imo,you need to get new rigging that doesn't have the floating yoke. If so, I will probably end up serving the static yoke. |
RE: Serving a Static Yoke....
I believe Hoyt called it a floating yoke when they came out with it but I think we are talking about the same thing.
|
RE: Serving a Static Yoke....
Pretty sure Static Yoke and Floating Yoke are two different things. The Hoyt's come with Floating Yokes, a Static Yoke is just the string split in half, and connects to limbs.
|
RE: Serving a Static Yoke....
ORIGINAL: Matt/TN Pretty sure Static Yoke and Floating Yoke are two different things. The Hoyt's come with Floating Yokes, a Static Yoke is just the string split in half, and connects to limbs. Your description is what I define a static yoke as. A floating yoke is exactly what comes on Hoyt's from the factory. |
RE: Serving a Static Yoke....
ORIGINAL: Bols ORIGINAL: Matt/TN Pretty sure Static Yoke and Floating Yoke are two different things. The Hoyt's come with Floating Yokes, a Static Yoke is just the string split in half, and connects to limbs. Your description is what I define a static yoke as. A floating yoke is exactly what comes on Hoyt's from the factory. |
RE: Serving a Static Yoke....
ORIGINAL: Matt/TN ORIGINAL: Bols ORIGINAL: Matt/TN Pretty sure Static Yoke and Floating Yoke are two different things. The Hoyt's come with Floating Yokes, a Static Yoke is just the string split in half, and connects to limbs. Your description is what I define a static yoke as. A floating yoke is exactly what comes on Hoyt's from the factory. As I am untwisting the buss cable to properly tune the bow, I am cannot control the yoke (Y)from untwisting as well. If I serve the cable directly below the split harness, I can untwist the rest of the buss cable without having the yoke untwist. |
RE: Serving a Static Yoke....
Not exactly sure why you seem to be having problems,I thought you were dealing with factory cables.
I believe all you will need to do is just take the yoke cables off and switch them,reserving shouln't be necessary.Then it is just a matter of rechecking your cam lean. |
RE: Serving a Static Yoke....
TFOX, he's not dealing w/ factory cables. These are aftermarket.
Dave, as you and I discussed on the phone.......Get the bow back to factory specs, and then check everything out. Tiller, brace, draw weight, ATA.......string length, all that stuff. As I mentioned, you've been messing w/ this long enough now to have either fixed it, or REALLY messed it up. I've learned when bow tuning if something isn't working, do the exact opposite, just to get it to change. Or........start over. I think starting over is exactly what the doctor ordered here bud. |
RE: Serving a Static Yoke....
ORIGINAL: mobow TFOX, he's not dealing w/ factory cables. These are aftermarket. Dave, as you and I discussed on the phone.......Get the bow back to factory specs, and then check everything out. Tiller, brace, draw weight, ATA.......string length, all that stuff. As I mentioned, you've been messing w/ this long enough now to have either fixed it, or REALLY messed it up. I've learned when bow tuning if something isn't working, do the exact opposite, just to get it to change. Or........start over. I think starting over is exactly what the doctor ordered here bud. I agree just get things back to spec and then if the yoke is twisted,untwist and reinstall. |
RE: Serving a Static Yoke....
Alright....like Mobow mentioned....I think my headaches will be fewer if I just remeasure the harnesses to factory specs, install them then measure all of my other points of interest.
From there....I should be close to factory specs as well as cam timing and synch. After I reach this....I should be able to make fine adjustments with a few twist here and there to get everything finely tuned. Sorry for the confusion all. I was understanding what I wanted to do but it was difficult to explain. I think this is a better route to take. |
RE: Serving a Static Yoke....
i dont think that the yolk untwisting is a big deal. unless it is really untwisted.
i always twist my bc from the other cam. Are you tuning with Javi's post on AT? |
| All times are GMT -8. The time now is 12:18 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.