HELP fletching contact.
 

i just got a new razortec with a trophy taker shakey hunter rest. i am shooting gold tips xt's 55 75 s i am shooting about 58 pounds i was having problems paper tuning it so i took a magic marker and covered my rest with it and i shot an arrow when i went and check the arrow i had black magic marker on the edges on the vanes and it did this no matter how a turned the nock.. i bought this rest so i didnt have fletching contact. anyone have any ideas on what i should do?

peta SUCKS

RE: HELP fletching contact.
 

make sure that it comes to the upright position in the last 1 or 2 inches of draw , if it comes up earlyer than that in the draw cycle you will have problems . make sure you cenershot and nocking point are close allso as you get better clearance from and arrow comming of the bow straight as opposed to one comming off crooked

We all have different oppinions , if we did'nt the world would be a BORING place

RE: HELP fletching contact.
 

i think my nocking point might be too low. is the nock point supposed to be above or below the rest?

peta SUCKS