Clearance problem
 

I am shooting blazer vanes thru a hostage rest and the vanes are just touching on the lower right side of the rest. It looks like it should have plenty of room but it leaves alittle stripe on the rest when I shoot it. Would moving the rest over alittle one way or the other fix this? Or does anyone have any suggestions on how to fix it? I am R/h and my wife is L/h and she has the same little stripe on one side also. Both bows were put together at the same shop so mabey they didn't get something exactly straight?

RE: Clearance problem
 

I'd think there should be plenty of clearance for BLAZERS in one of those rests, so then it comes to the bow and shooter. Is the rest centered on where the bow's center-shot is??? Also, you may want to look at the nock point, if you are making a stripe on the bottom of the rest, I might presume it's too low. The last thing I'd be interested in is how comfortable are you drawing the bow??? If you're having a hard time drawing it, you may be torquing things big time also.