diamond marquis module
 

I bought a new marquis the other day. I see there is two additional modules in the box. #3 and #4 are there and #2 is installed. I was wondering what these mods were for shure? It appears that they are able to be replaced without a press but what other adjustments have to be done at the same time? Thanks

RE: diamond marquis module
 

#2 is for a 29" draw so the number#3 should befor a28" draw and # 4 should be for a 27" draw.

That is correct no press needed to swap out the mods.

You will have to move the draw stop if you swap out the mod.

RE: diamond marquis module
 

Thanks for the reply. So if I want to add a .5 to 1 inch do I need a diff mod than I have? Can I do it some other way.

RE: diamond marquis module
 

If you currently have the 29" (#2) module installed and you want to get the 30 inch draw length setting then you will have to get a number 1 module and adjust the draw stop peg accordingly.

RE: diamond marquis module
 

So can I get the draw stop info or is that a dealer need to know issue? The manual does not show me from what I could tell. Can a guy just mess with the draw stop or am I playing with fire there? Thanks

RE: diamond marquis module
 

#1 is for a 30" draw....... 1.5 is a 29.5" draw........ 2 is a 29" draw........ so forth and so on.

Draw stop post must be adjusted accordingly.

RE: diamond marquis module
 

I shoot the same setting that you are looking for. I will see what my drawstop peg is set at when I get home. I have been tinkering with it a bit as of late to see what specific valley feel I prefer with that cam. If someone does not beat me to it I will post the peg setting this evening.

Sorry I could not help more now.

RE: diamond marquis module
 

I have the same problem but I want 28' were do I move the post?

RE: diamond marquis module
 

6.9 on the draw stop for a 28" draw on the marquis.