![]() |
muzzy broadheads
i just bought a pack of 3 blade muzzy's and its is either i am as dumb as a box of rocks or these thing are hard to put together i can not get the blades to seat in place to screw in the tip? and help would be appreciated.
|
RE: muzzy broadheads
There is a little trick to getting them in the ferrule right. They slip in from the front one at a time - the blades have a little tab that engages the rear. There should be a diagram on the package . . . .
|
RE: muzzy broadheads
What's fun is putting on a getting off the bleeder blades on the Muzzy Phantom 220 grain heads.:D:D.. But I still wouldn't use anything else.
|
RE: muzzy broadheads
[quote]ORIGINAL: The Rev
But I still wouldn't use anything else |
RE: muzzy broadheads
i wouldnt use anything else either now that i have gotten them setup and i have shot them, i havnt shot for a while because my target to a crap and i just bought a new one last night so my accuracy isnt perfect like it was but i can tell a difference between my old ones and the new ones.
|
RE: muzzy broadheads
What works good for me is to get one of the blades started in the slot (about half way down the ferrell/shaft) and then get the other one started about half way and then finially the third. Once you have all three blades in about half way gently push them down the rest of the way... Make sure they are all pushed all the way down and they screw on the tip...
|
RE: muzzy broadheads
Throw them away. I was using these same heads this year when I shot at a buck and missed this year, piece of garbage blades bend and ips brak off just hitting the ground, what the hell is a broadhead if itshatters on impacting a bone?? By far the phantom is the worse broad head I have ever shot in my life. Im stiucking with my Muzzy MX 4 and Wasp Hammer SST's.
ORIGINAL: The Rev What's fun is putting on a getting off the bleeder blades on the Muzzy Phantom 220 grain heads.:D:D.. But I still wouldn't use anything else. |
RE: muzzy broadheads
ORIGINAL: millerhunter13 i just bought a pack of 3 blade muzzy's and its is either i am as dumb as a box of rocks or these thing are hard to put together i can not get the blades to seat in place to screw in the tip? and help would be appreciated. |
RE: muzzy broadheads
yeah they are very accurate now that i have them put together, and as tough as tough can be. but i dont want to shoot them that much and already re sharpend them because i shot them to much.
|
RE: muzzy broadheads
Hey we have been killing a pile of deer with Muzzys and we love them, but all muzzys are not created equal. I had a problem with blades that wouldn't seat also. I called the company, and they sent out a new ferrel. I returned the original as requested. I also find the 4 blade 100s fly the most consistantly for me. We have pictures posted at whitetailkillers.com
|
RE: muzzy broadheads
pound for pound...the best broadhead eva!!
|
RE: muzzy broadheads
Maybe penny for penny. I just dont get the hype. Started off with them, and used them for years. Also had tuning problems with them for years. Found them to be very fragile, ferrules bending, blades bending, and thats on practice heads, not the actual supplied practice heads but reg. bladed b.h. I pulled my hair out for who knows how long before I figured out that the brand new b.h. I was shooting into my foam target had a tweaked blade and was causing my arrow to fly all over the place. My troubles ended once I stopped shooting them, and yes my bow is tuned perfectly. They are basically the best deal out there for the money, far from the best broadhead though.
|
RE: muzzy broadheads
I not sure of the exact Muzzy model your useing.
but i use the standard 3 blade fixed chizel tipnoprobs.... 'the bladesgo right into the ferrule when i use themyou just have to make sure your putting them in right other wize they dont go in eazy like they should. there is really no need for a cut on contact headshooting modern compound equip. they are the best head out there ...its a timetested design that works period. i have no pobs with mine...i replace the blades and use the same ferrule...never destroyed a ferrule yet...jut touch up the chizel point with a stone and slap new bladesin....if you hit major bone like a front shoulder then you will probably bend the ferrule. |
RE: muzzy broadheads
ORIGINAL: SouthDakotaHunter What works good for me is to get one of the blades started in the slot (about half way down the ferrell/shaft) and then get the other one started about half way and then finially the third. Once you have all three blades in about half way gently push them down the rest of the way... Make sure they are all pushed all the way down and they screw on the tip... also if your broadheads arent flying right its a tuning issue and not the broadheads fault % 99 of the time...chances are you arent shooting the right arrows for your bow...or your setup is off somehow. |
RE: muzzy broadheads
Everybody is free to shoot whatever they want. "Best heads out there", Thats a pretty bold statement. I think "Most heads for the money" would be more accurate. 6 for $35 is a good deal, but if I take just one of them out of the box and it wobbles(which at least one of them will) then its a bad deal. If they fly good for you then its a bargain. I'll gladly keep paying $35 for three strykers, that are sharp as scalpels, never wobble, and fly like field points everytime. I shoot a perfectly paper tuned Bowtech allegiance at 70lbs. with acc arrows, what would be the point if I didn't shoot the best heads I could afford. If I owned a ferrari I wouldnt put firestones on iteither. But, to each his own.
|
RE: muzzy broadheads
all the deer ive shot at are dead. cant get anybetter than that. but im also very diciplined in my shot selection. i guess not much can go wrong under 25 yards. and at the ideal 15 yards forget about it.
if and when i ever do make a mistake in my shot selection,or form itself... im not gonna blame my Broad head for it.tuning is never an issue durring the hunt if you did yourPreparation before the hunt. and then Pickinga spot, Squeeze, and Hold... during the hunt= dead deer. ive never had to throw out a ferrule because it didnt spin striat or have blades that werent sharp out of the package...i know many people that use them and never had any problems. thats 100% truth. in my eyes you cant beat them...especially not at the price. |
RE: muzzy broadheads
ORIGINAL: wis_bow_huntr Throw them away. I was using these same heads this year when I shot at a buck and missed this year, piece of garbage blades bend and ips brak off just hitting the ground, what the hell is a broadhead if itshatters on impacting a bone?? By far the phantom is the worse broad head I have ever shot in my life. Im stiucking with my Muzzy MX 4 and Wasp Hammer SST's. ORIGINAL: The Rev What's fun is putting on a getting off the bleeder blades on the Muzzy Phantom 220 grain heads.:D:D.. But I still wouldn't use anything else. |
RE: muzzy broadheads
I must agree the broken sholders I have devestated with a Muzzy 4 blade,have lead to short trailing. The broadhead has always been good after.I did destroy one on a rock tho. I would also agree not all Muzzys fly well. I often find one that doesn't fly. I think it is because of the grind on the tip most often, but once or twice the ferrule was the problem. You know a little wobbly on the spinners. Overall, still a bargain when you find replacement blades.I don't know if they are the best, but I haven't found better heads yet.
|
| All times are GMT -8. The time now is 02:27 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.