adjusting brace height
 

when adjusting your brace height, do you twist the cables to get your brace height and axle to axle set and then the string to bring the cams back to proper rotation, thanks for any help guys and girls

RE: adjusting brace height
 

You have to fiddle with both. Twisting the string to shorten your axle to axle and raise the brace height will shorten your draw length and mess up your cam rotation. So you have to twist the cables to get your draw length back and readjust cam rotation. Once you get close, then you take out or add a few twists on the string and/or cables to get things the way you want.

It's not as complicated as it sounds, but it does take a few tries and a little patience sometimes.

RE: adjusting brace height
 

where exactly do you measure the brace height from, the center of the rest mounting hole or from the deepest part of the grip

RE: adjusting brace height
 

from the deepest part of the grip