![]() |
cany tell a diff. straight,Rt. helical
I fletched a few straight arrows tonight and then I decided to fletch one Rt.helical (both blazers) and after fletching I could not tell a difference between the two. Will it really make a difference in flight. I know you really cant tell cause of the little contact patch of the blazers, but should I be able to tell??
|
RE: cany tell a diff. straight,Rt. helical
The Rt helical should spin while the straight will not unless you used offset.
Take a picture of theBlazers and I bet someone will be able to tell which is which if the picture is clear enough and close enough. You should be able to tell the difference. The helical will twist right a little. If you use offset with rt helical you can really tell. |
RE: cany tell a diff. straight,Rt. helical
If you're talking about a difference in point of impact you're right. You may not see a difference---with field points. Screw on some ofyour favorite broadheads and see if that makes a difference.
If you're fletching straight offet and your bow is well tuned then you still may not see a difference. |
RE: cany tell a diff. straight,Rt. helical
I think he's talking about physically being able to see the difference on the arrow.
|
RE: cany tell a diff. straight,Rt. helical
If that be the case, sir, then I defer to your first post. LOL.
|
RE: cany tell a diff. straight,Rt. helical
If he talking about flight I defer back to you. You're spot on. That's the problem with vague posts. lmao
|
| All times are GMT -8. The time now is 02:09 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.