HuntingNet.com Forums - Hoyt cam&1/2 cam switch

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Technical (https://www.huntingnet.com/forum/technical-20/)

- - Hoyt cam&1/2 cam switch (https://www.huntingnet.com/forum/technical/20073-hoyt-cam-1-2-cam-switch.html)

FM	01-01-2003 04:34 PM

Hoyt cam&1/2 cam switch

I have a 2001 Hoyt Ultratec with the command cam system. I was wondering if I could "retrofit" a cam&1/2 system to this bow. Has anyone this yet or can it be done? Any info? Thanks.

PABowhntr

01-02-2003 06:52 AM

RE: Hoyt cam&1/2 cam switch

Possibly and probably. Hoyt is coming out with some retrofit kits for some of the 2002 model bows....I am unsure about the 2001 models but wouldn't see why it would not work. Calling Hoyt directly is probably your best bet.

RobVos

01-02-2003 10:04 AM

RE: Hoyt cam&1/2 cam switch

If you go from CC cams to the cam1/2 you will most likely lose a lot of poundage (I would guess at least 10 pounds), so unless this is not a problem for you, you would need new limbs. The swap on single cam models is easily done without this happening, I believe.

All times are GMT -8. The time now is 10:26 PM.