Help with loose arrows in quiver
 

My bow is real quiet except one thing that i cant seem to help. I have a 6-arrow quiver on my PSE Firestorm and the little spots that hold the arrows seem slightly big for my arrows. I shoot Beman Max-4 400's. They hold in the quiver, but since the arrows are somewhat smaller they kinda rattle a little bit when i shoot. I dont wanna change quivers or anything, so what can i do to minimize this? I do have accessory limbsavers, but i dont know if that will help or not. Thanks

RE: Help with loose arrows in quiver
 

I never shoot with my quiver attached. You should take it off when you get to your tree or blind. If you insist on using it, you could cut out a piece of foam and glue it into the quiver.

RE: Help with loose arrows in quiver
 

Glue some felt in the clips to take up the excess space.

RE: Help with loose arrows in quiver
 

Check for screws on the botton of the part that is losse and it might be able to move the bubber things closer together. I know i can on my bow.

RE: Help with loose arrows in quiver
 

On my Fuse quiver, I have experimented with angling the rubber strut that holds the arrow shaft to where it's not quite square with arrow shaft - in order to get the A/C Super Slim shafts to fit in there a little more tightly.