![]() |
String/Peep problem
Ok i have a reacuring problem that i need to get fixed.My string frays about 1 inch above my peep sight.I use a peep sight with a tube, and it did it to my last string as well. I think it is caused by the tubing hitting the string. Is thier anything i can do to fic this? I was thinking about just getting the area served.
Thanks, Caleb |
RE: String/Peep problem
Caleb, It is possible that serving that area can take care of your problem, but don't overlook the possibility of using a G5 meta peep or Tru-Peep. Either with a quality string and proper setup would give you zero problems. Chances are you would never go back to the tube setup.;)
I have hunted for years without a tube and it has never caused me any problem at all.:) |
RE: String/Peep problem
I'll second the idea of going to a tubeless peep. They are truly remarkable and inexpensive.
|
RE: String/Peep problem
Caleb,
With your setup, quality strings, bow, etc., you should in no way have to use a peep with a tube. I've had really good luck with the G5 Meta peep, and have had really good luck. Good luck to you! |
RE: String/Peep problem
Get a TRU PEEP and forget about it!:D:D
|
RE: String/Peep problem
try a RAD peep smaller tube plus you may have too much tube used on your peep... you can also go tubeless but if you do get a good aftermarket string ie bucknasty, wolfen, winners choice, etc......
|
| All times are GMT -8. The time now is 08:21 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.