Which String To Choose???
 

I want to buy a new String and Cable setup for my Hoyt that I do not need to let settle before tuning. I think that pre-stretched strings are what Im looking for. Does anyone know any good pre-stretched strings out there?

RE: Which String To Choose???
 

Vapor Trail and Winners Choice make good strings.

Gibblet supposably makes good strings. You can find him here on this site.

RE: Which String To Choose???
 

Gibblets strings are Top Notch, he also can answer any string questions you may have.Would advise you to talk to him before you purchase any string.

RE: Which String To Choose???
 

No doubt that you should contact Gibblet. His strings are as high in quality as you'll find, but less expensive than some of the major brands. And made from the same materials, I might add.

RE: Which String To Choose???
 

Sorry to thread jack, but my reflex (hoyt) bow's string has some small frays and rips in it. I keep it waxed, and have shot it for more than a year. Should I replace it?

RE: Which String To Choose???
 

Yes, and contact Gibblet. I can tell you how sore your face can get from a frayed string. I had a bow blow up in my face a few years ago..."Smarts"

I know I left myself open to some comebacks.:D:D

RE: Which String To Choose???
 

Does anyone use Winners Choice Strings? I have heard that they are a good Bowhunting string.

RE: Which String To Choose???
 

is there a site for gibblets stuff? I'm needing a new string for my hoyt.

RE: Which String To Choose???
 

The winners choice strings are a very good string . I used them before and they wore like iron but they are pretty pricey

RE: Which String To Choose???
 

It has been said before contact gibblet his strings are as good as they come and less expensive.

But no matter what GOOD quality string you put on there will be some shoot in time, with John's strings around 50 shots will have it all settled in and ready for peep installation and tuning.

RE: Which String To Choose???
 

i'd agree with that ausie. any time you put a new string on its easier to shoot the bow 30-50 times before putting in the peep. i'd also agree that winner's choice makes a very nice set of strings. mike carter and wayne berry do also - if wayne is working right now i don't know. vapor trail - the reports aren't as good as they used to be. i'd say this is a good time to order from any of us. in a few weeks everyone's wait time will start increasing. w/in1.5 months i believe even WC will have a 3 week waiting list - they did last year - mine was longer - mike's was longer.... so, now's a good time - before the hunting rush - whoever you get them from.

RE: Which String To Choose???
 

Yes, I have a set of WC's on my one hunting bow. I can attest that they are good, very good. I also tried Prostrings on a 2004 SlayR and those were good as well.

But since I had a chance to try Gibblet's strings and they are the equal of those others I mentioned, but at a less expensive price. In fact his end and loop servings were neater than the WC's.

As for a break-in time? It varies. Gibblets string actually settled into the cam in about 10 shots and nothing has moved since it was new. Others may take 50-100 shots and then become stable. Still not much considering the pressure they are under.

For those who don't know; there is nothing magical about the string material used by any of these guys. For the most part they use Brownell or BCY materials with BCY 452X or 8125 being the most popular. There are lots of choices.

The difference between aftermarket and most factory strings is that the former is put together and then stretched under a lot of pressure. This tends to even out the workload on each strand till they are all doing the same work. Then they are twisted to proper length and then served, again, under pressure. The end loops are usually paper clipped together to maintain the twists and then shipped to the buyer. Sometimes a few twsists may be added or subtracted to properly spec a bow or get proper peep alignment, but this doesn't hurt the integrity of the string.

Most factory strings are, on the other hand, just wrapped around a string jig, maybe twisted or maybe not, and served accordingly. Not usually pre-stretched so they end up creeping while on the bow being shot until all the strands equal out the workload. While this is happening the bow is changing tune. Draw length gets longer and weight goes up. Ever wonder why your bow doesn't shoot as well as it did a few weeks or months ago?
Along with this creeping the servings separate or spread apart, especially at the cam modules where there is a sharper bend. This is also partly due to the fact that the servings are not tight to begin with.

To tell the truth there are some mighty fine bows being made today. Many of them with inferior strings. Things are getting better, but not quick enough considering the retail price of upper end bows.

I shoot Martin bows and their strings have been pretty good for me the last couple years. None the less, I have become aware of the pitfalls of most factory strings and usually replace them as soon as I get a new bow. Besides, I like picking some juicy colors for my 3D bows. I'd also have to say that very rarely do I ever replace those aftermarket strings as I keep a bow only about 1 1/2 years anyway.

So anyone who is reading this, do yourself a favor and replace your factory strings. If it's Gibblet you want to deal with then he is amember of this site. All you have to do is check his profile or PM him for any info you may need. He's a standup guy and backs his work.

OK, I got long winded enough. Just hope this helps educate some with less experience.

RE: Which String To Choose???
 

I went with Vapor Trail and i am happy!! Next time i might get a Gibblet though, i heard thier good!

RE: Which String To Choose???
 

I also use Gibblett's strings.

RE: Which String To Choose???
 

You can't go wrong with Gibblet's strings ,I've had severel and haven't had any complaint's .

nubo

RE: Which String To Choose???
 

I use Trophy Bound. They're great!!

RE: Which String To Choose???
 

I've got to buy my bow press first. I haven't goten around to doing that and If i want a new string Im gonna need it.

RE: Which String To Choose???
 

Make your own ratchet-lock type bow pres. Mine works great!