Aligning Meta Peeps
 

Was just wondering if, when you install a Meta Peep, is there a trick to doing it so that when you draw the bow back after, the peep will be facing the right way and not turned to the side a bit? I just put one on for the first time and when the bow is drawn back, the peep is turned to one side just a little. How can I correct this?

Thanks

RE: Aligning Meta Peeps
 

If it's just a little I'd either twist or untwist 1/2 turn from the string at the bottom cam, depending on the direction you need to go.

RE: Aligning Meta Peeps
 

Twisting the string a 1/2 turn works, but if your shooting a string loop just line it up with the peep and should be right were it needs to be at full draw.

RE: Aligning Meta Peeps
 

Okay, thanks. I'll give that a try...