Broadheads
 

I recently purchased a dozen goldtip carbon arrows without the inserts put in. I also purchased the Dixon Broadhead tuner so I can better aline the insert with the shaft and also aline the blades with the vanes. The question is, what is the proper way to glue in the insert for carbon arrows ie. rotate the insert or not, applying glue etc.? I have not done this before and don't want to mess it up.
Thanks for your input.

RE: Broadheads
 

CLEAN the inside of the arrow first (many carbon arrows can be easily cleaned with a .270 rifle brass brush)
Use 5 minute epoxy as your glue
twist as you insert the insert (you can just twist back and forth...you don't need to spin)
now...you should have about 4 minutes left to make sure they are PERFECT with your tuner.